AndyS Mjagnir WIP

For Work in Progress blogs.
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

AndyS Mjagnir WIP

Postby AndyS » Fri Aug 16, 2013 12:02 pm

So guys, as I'm painting the Trolls I'm painting this beast too! I'm not breaking any new ground with the Trolls so I thought I'd start this WIP as it should be more interesting!

Image

I attacked him with the airbrush. The armour a mix of VMA cammo black brown and black. The flesh with a mix of Foundry mediterranean flesh shade and VMA cammo black brown. Honestly a little darker than I hoped.

After taking the photo I went over the flesh with Reaper bronzed flesh shade (I think!) but it would not flow properly even when heavilly thinned with VMA thinners. So I had to stop.

Has anyone used Reaper paints in the airbrush before? It seemed like it was drying on the needle.


Cheers!
Wyrd bið ful aræd
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Mjagnir WIP

Postby AndyS » Mon Aug 19, 2013 12:14 pm

Well I solved my Reaper paint problem by thinning with water, thinners and flow extender. Very dilute but at least it goes through the airbrush! Using this method I airbrushed up to Reaper Tanned Flesh light. I'm beginning to gain some confidence and I can just about put the paint where I want it now! Still far for expert, or even competant for that matter.
After this I washed the whole flesh area with very, very dilute VMA cammo black brown and black mix. This was in order to bring out the amazing texture on the skin.
Sorry, no pic of this stage really.
OK, so the flesh of a model this size is quite daunting to me, so I decided to concentrate my efforts on the face to start. Using the Reaper Tanned Flesh triad and also the Pale flesh I highlighted the face.........then went to bed. Unhappy as it looked really washed out and pale! So before work today I added in some Tanned flesh again, some red and some purple. This is where I am right now.

Image

Image

The face is still somewhat pale but it's getting there!
Wyrd bið ful aræd
grefven
Posts: 149
Joined: Mon Feb 25, 2013 6:26 pm

Re: AndyS Mjagnir WIP

Postby grefven » Mon Aug 19, 2013 4:18 pm

I think it looks good, especially with how the purple shines through.
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Mjagnir WIP

Postby AndyP » Mon Aug 19, 2013 7:23 pm

I'm liking the skin tone too. Also you asked previously to let you know how I get on with the iwata eclipse hp-cs airbrush I bought and can say it makes thing a lot easier. Not gone into highlighting with it yet but much easier to position the paint where I want it and alter the amount being delivered. Much smoother trigger action. Definitely recommend upgrading from the cheapies.
As I always say. At the end of the day.................it goes dark :-)
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Mjagnir WIP

Postby AndyS » Mon Aug 19, 2013 7:34 pm

Cheers guys. Looks like a new airbrush could be on the Xmas list then!
Wyrd bið ful aræd
darthmarsh
Posts: 56
Joined: Tue Aug 06, 2013 10:52 pm

Re: AndyS Mjagnir WIP

Postby darthmarsh » Mon Aug 19, 2013 9:44 pm

Andy I think that looks absolutely amazing. I like the pale face to, It helps to give it a otherworldly feel
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Mjagnir WIP

Postby AndyP » Mon Aug 19, 2013 10:27 pm

How are you finding getting in under his hair? I was of 2 minds to leave it off until after I paint him.
As I always say. At the end of the day.................it goes dark :-)
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Mjagnir WIP

Postby AndyS » Tue Aug 20, 2013 6:13 am

Andy, I'll let you know when I get round to that bit! I put the hair on as it needed some filling. I didn't want to have to do that after painting the skin.
Still not sure about the pale skin. I'll put another pic up later. Looks a little cartoony. I'll leave it for now and see how the rest turns out!
Wyrd bið ful aræd
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Mjagnir WIP

Postby AndyP » Tue Aug 20, 2013 6:49 am

I did the same with the hair but I keep looking at it and thinking I may regret it.
As I always say. At the end of the day.................it goes dark :-)
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Mjagnir WIP

Postby AndyS » Tue Aug 20, 2013 11:41 am

As promissed another couple of pics. The face as of now and the back, showing what I've managed with the airbrush. The back obviously needs a lot of brush work!
I think I have figured out how to improve the face. Some glazes with olive greens and browns. Just to sit the colour somewhere between Troll and Man. But this will wait until the rest of the skin is ready.

Image

Image

More tomorrow......maybe!
Wyrd bið ful aræd
User avatar
zedmeister
Posts: 131
Joined: Mon Feb 25, 2013 2:26 pm
Location: Mercia, UK
Contact:

Re: AndyS Mjagnir WIP

Postby zedmeister » Thu Aug 22, 2013 9:46 am

Daaammmmnnn. Already shaping up nicely.

This gonna be good
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Mjagnir WIP

Postby AndyS » Thu Aug 22, 2013 11:36 am

Cheers Zed, truth be told I'm not very happy with it at the moment!I've painted the stomach area and it looks totally different to the head. Probably a bit more how I'd like, but looks dirty some how. Let's hope I can pull it together at the end.
Wyrd bið ful aræd
darthmarsh
Posts: 56
Joined: Tue Aug 06, 2013 10:52 pm

Re: AndyS Mjagnir WIP

Postby darthmarsh » Fri Aug 23, 2013 12:00 am

I really like it as it is Andy. The extra details like the lips and teeth really help to pull it all together. He looks ghoulish and incredibly intimidating! good start on the chainmail as well, there's crazy amounts of detail on that thing
Murderous Monkey
Posts: 8
Joined: Mon Jul 29, 2013 11:40 am

Re: AndyS Mjagnir WIP

Postby Murderous Monkey » Fri Aug 23, 2013 12:35 pm

I have been lurking for some time and (having finally logged on) wanted to say that your Norse inspired me to purchase the faction before the Kickstarter pricing finished. I'm looking forward to seeing how this shapes up over the next few weeks!
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Mjagnir WIP

Postby AndyS » Tue Aug 27, 2013 11:42 am

OK, so I have a few new pics. First some more work on the face and skin.
Image
Image
Image
I have added some more brown to the face as it was too bright. I have also begun the stomach, torso and the right hand side of the back. Then I got bored of skin! To continue momentum of the piece I decided to move to other parts of the model.
Image
Image
Image
And that's it for now. I should get the brushes out again tonight! I'm not sure about the patchwork skirt at the moment. That may change.
Wyrd bið ful aræd
User avatar
JLLongshore
Posts: 85
Joined: Wed Mar 13, 2013 10:15 am

Re: AndyS Mjagnir WIP

Postby JLLongshore » Sun Sep 01, 2013 3:19 pm

He gets scarier each update !!
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Mjagnir WIP

Postby AndyS » Wed Sep 04, 2013 11:41 am

So I've been splashing some paint around again. I changed the green leather patches as I found them too distracting, replaced them with a slightly different brown.
Painted the arm and leg wrappings, I actually like what I've done with these for a change! Bones are done too!

Image

Image

I still feel there is a long way to go and not much time to get there, still have to re-visit the flesh, start the hammer........not to mention the base!
Wyrd bið ful aræd
Lesrac
Posts: 24
Joined: Mon Feb 25, 2013 2:42 pm
Location: CH

Re: AndyS Mjagnir WIP

Postby Lesrac » Wed Sep 04, 2013 2:08 pm

he looks really good.
can't wait for the finished mini
Quuids
Posts: 51
Joined: Wed Jun 19, 2013 9:43 pm

Re: AndyS Mjagnir WIP

Postby Quuids » Wed Sep 04, 2013 2:11 pm

Incredible work, you are almost convincing me to buy one of these!
darthmarsh
Posts: 56
Joined: Tue Aug 06, 2013 10:52 pm

Re: AndyS Mjagnir WIP

Postby darthmarsh » Wed Sep 04, 2013 11:58 pm

He keeps getting better and better. I think you did the right thing with the patchwork, it is less obvious and looks better for it. Can I ask how you do you metals? the Pauldron is brilliant
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Mjagnir WIP

Postby AndyS » Thu Sep 05, 2013 9:20 am

For metal I basecoat the whole area with dark brown.
Using an old GW drybrush I 'stipple' everything except the recesses with a dark metal colour (currently whatever the GW replacement for Boltgun metal is called).
Then I get VMC oily steel and 'stipple' stlghtly less area with that. Then repeat with VMC natural steel, then with VAC steel.
Then highlight the edges with VAC steel.
Then add shadows with thinned dark brown and some dark green in places too.
Add rust to taste with Foundry paint systen tan! (thinned of course).
Wyrd bið ful aræd
User avatar
JLLongshore
Posts: 85
Joined: Wed Mar 13, 2013 10:15 am

Re: AndyS Mjagnir WIP

Postby JLLongshore » Sat Sep 07, 2013 6:18 am

can't really rate or grade him, or comment on him, I just have to look at him.
Quuids
Posts: 51
Joined: Wed Jun 19, 2013 9:43 pm

Re: AndyS Mjagnir WIP

Postby Quuids » Sat Sep 07, 2013 9:30 pm

So I ordered him, who wants to paint him? Haha I can't do these mini's justice I'm afraid....
User avatar
SteamHammer
Posts: 21
Joined: Mon Jul 08, 2013 8:48 am

Re: AndyS Mjagnir WIP

Postby SteamHammer » Mon Sep 09, 2013 12:35 pm

Looking beautiful. Odd request but could you post a photo of your stippling brush please?
User avatar
razormage
Posts: 147
Joined: Mon Feb 25, 2013 3:09 pm
Location: San Antonio, Texas
Contact:

Re: AndyS Mjagnir WIP

Postby razormage » Mon Sep 09, 2013 11:49 pm

SteamHammer wrote:Looking beautiful. Odd request but could you post a photo of your stippling brush please?

Heh, I went looking for this because I was curious to try some stippling tonight. I found this in his Troll WiP thread:

AndyS wrote:The technique is too easy! Just get an old drybrush from a well known manufacturer of former greatness. Put on your paint. Wipe a good deal of it off on a cloth. Poke it at the area you want the paint on! I did use a cut off brush with harder bristles on the axe. It makes more definate lines. The old splayed out drybrush was softer so produced a softer effect. A combination of both is good!

I'm guessing the mentioned manufacturer starts with a G and rhymes with Blames Dirkchop.
--Ryan Smith
Blog: http://thebeerwaaagh.blogspot.com/
Twitter: @beerwaaagh
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Mjagnir WIP

Postby AndyS » Tue Sep 10, 2013 6:04 am

Correct!
Wyrd bið ful aræd
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Mjagnir WIP

Postby AndyP » Tue Sep 10, 2013 8:38 am

Blames Dirkchop :lol: :lol: :lol:
As I always say. At the end of the day.................it goes dark :-)
User avatar
SteamHammer
Posts: 21
Joined: Mon Jul 08, 2013 8:48 am

Re: AndyS Mjagnir WIP

Postby SteamHammer » Tue Sep 10, 2013 9:47 am

Thanks. Time to chop up an old brush to accompany the splayed drybrushing one I used.
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Mjagnir WIP

Postby AndyS » Tue Sep 10, 2013 9:56 am

I'll put the brush pic up at lunchtime!
Wyrd bið ful aræd
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Mjagnir WIP

Postby AndyS » Tue Sep 10, 2013 9:57 am

Blames Dirkchop, sounds like an 'adult performer'!
Wyrd bið ful aræd
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Mjagnir WIP

Postby AndyS » Tue Sep 10, 2013 11:58 am

here are my brushes Steamhammer.

Image
Wyrd bið ful aræd
User avatar
SteamHammer
Posts: 21
Joined: Mon Jul 08, 2013 8:48 am

Re: AndyS Mjagnir WIP

Postby SteamHammer » Tue Sep 10, 2013 12:38 pm

Thanks. Will make one of my own and try it out on the next tarvax.
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Mjagnir WIP

Postby AndyS » Wed Sep 11, 2013 11:45 am

So another few pics to add to the WIP. Have added the arm! Done more skin and probably some other bits I can't remember. Still so much to do and so little time to do it!

Image
Image
Image
Image

I really should make a start on the base too!
Wyrd bið ful aræd
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Mjagnir WIP

Postby AndyP » Wed Sep 11, 2013 12:03 pm

Looking great as usual. Really like that skin tone. What have you used? Tried your stippling technique on Beowa's metal. Works really well and easy to get the hang of. Nice one
As I always say. At the end of the day.................it goes dark :-)
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Mjagnir WIP

Postby AndyS » Wed Sep 11, 2013 12:10 pm

Glad you're getting on with the stippling Andy. Will Beowa be ready for WAMP?
Flesh wise, since I started using a proper brush it's Reaper Tanned flesh I think. With Fair skin also. These both come as a triad. Red glazes are also Reaper (not actual glazes but paint with glaze medium and water). Can't remember off hand which one so I'll look later.
I'm beginning to like the Reaper paints. They are really matte. No shine at all once dry. Also the blending shows when wet but not so much when dry. So the blends are better than you think!
Wyrd bið ful aræd
User avatar
razormage
Posts: 147
Joined: Mon Feb 25, 2013 3:09 pm
Location: San Antonio, Texas
Contact:

Re: AndyS Mjagnir WIP

Postby razormage » Wed Sep 11, 2013 12:40 pm

Just gorgeous, AndyS. It's always a good day when you've got new WiPs. I'm really enjoying the way his hair is greyed up close to the temple and then browns as it goes down its back. Not sure if he's dyeing it, or it's just getting filthy on that back!
I'm hoping to try your stippling out on my Cawrdraig, but right now it's a race to even get the third one finished, much less come back to them! I was surprised by how little your stippling brush was actually splayed; I was expecting something closer to a totally destroyed brush.
That leather is gorgeous.
--Ryan Smith
Blog: http://thebeerwaaagh.blogspot.com/
Twitter: @beerwaaagh
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Mjagnir WIP

Postby AndyS » Wed Sep 11, 2013 1:01 pm

Cheers Razor! I thought I'd try and make the hair look like he's getting old. So grey at the roots and his younger hair colour at the ends. Dreadlocks contain lots of old hair which is no longer attached to the scalp but with nowhere to go! The hair is still in progress so will change a little.
Wyrd bið ful aræd
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Mjagnir WIP

Postby AndyP » Wed Sep 11, 2013 2:16 pm

AndyS wrote:Glad you're getting on with the stippling Andy. Will Beowa be ready for WAMP?

They are both done. Just finishing off the bases now so should be on there by end of the week. Not up to your quality but I'm pretty happy with them. Always room for improvement though :-)
As I always say. At the end of the day.................it goes dark :-)
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Mjagnir WIP

Postby AndyS » Wed Sep 11, 2013 2:19 pm

Looking forward to seeing them Andy.

Yes, always room for improvement!
Wyrd bið ful aræd
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Mjagnir WIP

Postby AndyS » Wed Sep 18, 2013 2:05 pm

Here's the honestly not finished model.

Image

I think I need a face close up added for WAMP. Maybe.
Wyrd bið ful aræd
User avatar
razormage
Posts: 147
Joined: Mon Feb 25, 2013 3:09 pm
Location: San Antonio, Texas
Contact:

Re: AndyS Mjagnir WIP

Postby razormage » Wed Sep 18, 2013 2:38 pm

I would also, if you could fit it somewhere, try to get a close up of the details you've got on the metallic shoulder pads. The model is so large that at the distance you've got, a lot of the nice detail painting you've done is lost. I'm loving the way he's turned out, and am now kind of intimidated about painting my own. Maybe I should just stick with draconic stuff for the moment.
[EDIT: Then I actually clicked through and viewed it at 1000px. Please ignore me, for I was ignorant. the details are coming through great.]
--Ryan Smith
Blog: http://thebeerwaaagh.blogspot.com/
Twitter: @beerwaaagh
User avatar
zedmeister
Posts: 131
Joined: Mon Feb 25, 2013 2:26 pm
Location: Mercia, UK
Contact:

Re: AndyS Mjagnir WIP

Postby zedmeister » Wed Sep 18, 2013 2:41 pm

Lovely piece of work. Definitely need higher res images!
User avatar
razormage
Posts: 147
Joined: Mon Feb 25, 2013 3:09 pm
Location: San Antonio, Texas
Contact:

Re: AndyS Mjagnir WIP

Postby razormage » Wed Sep 18, 2013 2:55 pm

zedmeister wrote:Lovely piece of work. Definitely need higher res images!

Click the thumbnail he put up, and it'll take you to his Photobucket, which has a much higher res (if you click twice to zoom in). I thought the same thing until I realized it.
--Ryan Smith
Blog: http://thebeerwaaagh.blogspot.com/
Twitter: @beerwaaagh
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Mjagnir WIP

Postby AndyS » Wed Sep 18, 2013 2:57 pm

click on the magnifyer then view original.
Wyrd bið ful aræd
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Mjagnir WIP

Postby AndyP » Wed Sep 18, 2013 4:24 pm

He looks fantastic. Really well done :-)
As I always say. At the end of the day.................it goes dark :-)
grefven
Posts: 149
Joined: Mon Feb 25, 2013 6:26 pm

Re: AndyS Mjagnir WIP

Postby grefven » Wed Sep 18, 2013 7:10 pm

Looks totally awesome. :)
User avatar
Mahrdol
Posts: 16
Joined: Mon Feb 25, 2013 3:40 pm

Re: AndyS Mjagnir WIP

Postby Mahrdol » Wed Sep 18, 2013 10:59 pm

Yes very nice.
User avatar
SteamHammer
Posts: 21
Joined: Mon Jul 08, 2013 8:48 am

Re: AndyS Mjagnir WIP

Postby SteamHammer » Thu Sep 19, 2013 8:16 am

He looks awesome and even though mine would never turn out that nice I kind of wish I'd got him now.

Return to “Work in Progress”

Who is online

Users browsing this forum: No registered users and 1 guest