Here are the pieces with pins (sorry it's a little blurry):
![Image](https://lh6.googleusercontent.com/-vinPspI_2NE/UTqmdWtqc5I/AAAAAAAAAOQ/788XBT1Y6xg/s1542/IMAG0301.jpg)
Here are a few pictures of him in rough assembly. I just inserted the parts with pins but did not glue anything permanently yet.
![Image](https://lh5.googleusercontent.com/-KLd_BoLREjo/UTqmdeON3II/AAAAAAAAAOU/MIu-tMzAJTE/s1542/IMAG0302.jpg)
![Image](https://lh6.googleusercontent.com/-Kdt36saJ1Do/UTqmepEDbKI/AAAAAAAAAOc/Qm5_fihVdPg/s1542/IMAG0304.jpg)
As you can see he is quite the beast! It is an amazing model and quickly becominga favorite.
Cleanup wasn't too bad though some of the resin was more a translucent blue/grey. It didn't seem to affect the detail or cleanup any but was odd. Maybe some of the resin didn't mix completely or something, not sure. But once it is primed it won't be noticeable. The anchor was a bit warped but a quick dunk in some hot water and it straightened right out.
Next thing on the list is to fill some gaps where the parts connect and then move to priming and painting. More to come as I progress!